support
LPG- / NH3-Equipment

LPG Vaporizer

LPG vaporizing systems.

Electrical LPG vaporizer

LPG hot water vaporizer - feed-out type - with electric heating elements.

  • Optionally with or without EExd control box
  • Design temperature: -40˚C to + 120˚C
  • Design pressure: 40 bar

Features:

  • „Manometer Ø 60 mm, 25 bar
  • Pressure Relief Valve 1/2“, 18 bar
  • Thermometer -20° C to +120° C
  • Water Expansion Pot
  • Filter
  • Ball Valve DN15 PN40
  • Solenoid Valve PN40

DATASHEET

LPG hot water feeded vaporizer

LPG hot water vaporizer  - feed-out type - feeded by external boiler.

  • Design temperature: -40˚C to + 120˚C
  • Design pressure: 40 bar
  • Inlet and Outlet water: 1"

Features:

  • „Manometer Ø 60 mm, 25 bar
  • Pressure Relief Valve 1/2“, 18 bar
  • Thermometer -20° C to +120° C
  • Water Safety Valve 1,5 bar
  • Filter
  • Ball Valve DN15 PN40
  • Air Vent Valve
  • Solenoid Valve PN40
Capcity Weight
100 kg/h 100 kg
200 kg/h 100 kg
300 kg/h 150 kg
500 kg/h 200 kg
750 kg/h 300 kg
1000 kg/h 300 kg

LPG vaporizer systems (plug&play)

LPG vaporizer systems completely installed on mounting frame in cabinet construction for plug&play installation.

Consisting of:

  • LPG vaporizer (with electric heating elements or feeded by external boiler) with EExd control panel
  • Optionally 1st stage or double stage regulating unit (double line or single line)
  • Mounting frame
  • Cabinet optionally in stainless steel or aluminium execution

DATASHEET

Electrical dry-type Vaporizer

The dry-type vaporizers do not require any heat transfer fluid. The liquid is directly heated using an aluminium core as heat transfer medium.
  • Dry-type vaporizer with a nominal capacity of 15 kg/h up to 160 kg/h
  • Stainless steel housing
  • 2 solenoid valves at inlet
  • Relief valve at outlet
  • Optionally in cabinet construction with integrated regulating units, completely installed and wired (plug&play).

Pressure regulating units

First stage single line regulating units

Pressure regulating units for plug&play installation on site or according to customer request.

Features

  • Flanged inlet
  • Ball valve
  • 1st stage Pressure Regulator Coprim Alfa series optionally with UPSO/OPSO
  • Condensate trap
  • Needle valve
  • Pressure gauge 2,5 bar
  • Safety valve
  • Ball valve
  • Flanged outlet
Size Inlet Outlet
100 kg/h DN25 DN25
200 kg/h DN25 DN50
500 kg/h DN40 DN65

First stage double line regulating units

Pressure regulating units for plug&play installation on site or according to customer request with flow rates from 100 kg/h / 200 kg/h / 300 kg/h / 400 kg/h / 500 kg/h / 1000 kg/h.

Features:

  • Flanged inlet
  • Ball valve
  • 1st stage Pressure Regulator Coprim Alfa series optionally with UPSO/OPSO
  • Needle valve
  • Pressure gauge
  • Ball valve 1/4"
  • Ball valve 1/2"
  • Safety valve 1/4"
  • Butterfly valve
  • Condensate trap
  • Flanged outlet

Double stage single line regulating units

Pressure regulating units for plug&play installation on site or according to customer request.

Features

  • Flanged inlet
  • Ball valve
  • 1st stage Pressure Regulator Coprim Alfa series
  • Condensate trap
  • Needle valve
  • Pressure gauge 2,5 bar
  • Safety valve
  • Ball valve
  • 2nd stage Pressure Regulator Alfa series optionally with UPSO/OPSO
  • Pressure gauge 100 mbar
  • Flanged outlet
Size Inlet Outlet
100 kg/h DN25 DN40
200 kg/h DN25 DN50
500 kg/h DN40 DN80

Double stage double line regulating units

Pressure regulating units for plug&play installation on site or according to customer request with flow rates from 100 kg/h / 200 kg/h / 300 kg/h / 400 kg/h / 500 kg/h / 1000 kg/h.

Features:

  • Flanged inlet
  • Ball valve
  • 1st stage Pressure Regulator Coprim Alfa series
  • Needle valve
  • 2 x Pressure gauge
  • 2nd stage Pressure Regulator Alfa series optionally with UPSO/OPSO
  • Ball valve 1/4"
  • Ball valve 1/2"
  • Safety valve 1/4"
  • Butterfly valve
  • Condensate trap
  • Flanged outlet

500 kg/h regulating unit with 2 x condensate separator.